LILYGO® Shipping to worldwide
T-Watch S3
T-Watch S3
Share
About Shipping
About Shipping
Methods & Delivery Time
- Standard Express: 25-30 Days
- YunTu Express : 10-20 Days
(Company name can't be used consignee) - DHL: 10-17 Days
- FedEx: 10-17 Days
Please note that all delivery times are estimated for reference only.
Check More Info: Shipping Policy
About Tax
About Tax
We only charge you for the cost of the product and shipping, no taxes are included.
Specifications
MCU | ESP32-S3 |
FLASH | 16MB |
PS RAM | 8MB |
Platform | Arduino-IDE, ESP-IDF, VS Code, Micropython |
Wireless |
Wi-Fi: 802.11 b/g/n Bluetooth: BLE V5.0 |
Onboard Functions | RTC, Microphone, MAX98357A, Power Detection, BMA423 3-axis acceleration sensor |
DRV2605 | Haptic Driver Motor for ERM and LRA |
AXP2101 | Highly Integrated Power Management Unit |
SX1262 Low Power LoRa Transceiver Support Baud: 433Mhz, 868Mhz, 915Mhz |
Sample Code For Reference [Github]
If you need technical support please check the below link to find more details.
Micropython ESP32 Firmware Download Address
Tip: You need to turn on the switch when you turn it on for the first time, and it is recommended to turn off the battery switch when it is not used for a long time.
- 1 X T-Watch
- 1 X Cable
-
Who can use
It's easier to master these development boards with a basic programming knowledge [engineers/ students/ makers, etc..]
-
Accelerated processing
International orders please make sure your address is in English
For Hong Kong, Macau and Taiwan orders, please note your personal ID. -
Got a question
Click on the bubble in the bottom right corner where some frequently asked questions are answered, or just drop us a line.
I like it very much, I cut some parts from official example and add some more.
I use it almost daily, there need some more done for power efficiency, but is good enough with how it is now around 16 hours at 10Mhz STBY speed.
In future an OLED version and IR receiver beside the IR TX will be welcome, for IR RX can be used the same photo-diode used for TX wired with a capacitor to an analog capable pin, good for fast remote cloning being possible to create FFT filtering to isolate the RX frequency carrier :) and USBC for the next version will be welcomed.
I haven't used the LoRa yet but I plan to use it very soon.
BTW if someone want a C++ lvgl wrapper written by me, here it is: https://github.com/dev-board-tech/lvglCpp , is in development but is functional :)
Awesome little thingy to play around with the microcontroller and a lot of peripherals, I especially love the fact that you can remove the battery.
Well, of course also that you can flash it and program it however you like, 10/10
I do wish there was a little more information on the code for it but it isn't really information about the watch I am after so much as information on signals I'd like to replicate with it.
Works great as a Dev kit. Not really fit as a daily use watch. There are a lot of glitches and crashes during the day. Also, Meshtastic firmware is not ready for use on this device due to power usage and crashes.
Don't forget to flick the switch under the battery to on! I was very frustrated with it not working for a few days and then during one of the trouble shootings with a multimeter I noticed the batter is doing fine and the switch is the only place that has power. flicking it to on made the watch start.
Note that this is not a smart watch meant for consumers. this is a smartwatch meant for creators and tinkerers. Don't expect it to be perfect user experience, expect it to be a perfect development platform and with that mindset, looks like they have delivered.