LILYGO® Shipping to worldwide
T-Display-S3
T-Display-S3
ESP32-S3 1.9 inch ST7789 LCD Display Touch Screen Development Board
4.6 / 5.0
(134) 134 total reviews
Couldn't load pickup availability
Share
About Shipping
About Shipping
Methods & Delivery Time
- Standard Express: 25-30 Days
- YunTu Express : 10-20 Days
(Company name can't be used consignee) - DHL: 10-17 Days
- FedEx: 10-17 Days
Please note that all delivery times are estimated for reference only.
Check More Info: Shipping Policy
About Tax
About Tax
For countries other than USA, we only charge [product cost + shipping cost], no tax.
Orders from US customers are adjusted according to different shipping channels:
1. For Standard Express Order: We charge【product cost + shipping cost + part of tax】this rate is only applicable to shipment from China warehouse.
(Since the tax is charged according to the declared amount, we have filtered the most suitable solution, and it is most likely that this shipping way does not need you to deal with the customs duty, but it is not absolute)
2. For DHL Order: We charge【product cost + shipping cost】no any tax, tax need you to pay attention to the local policy changes, when the parcel arrives at the US customs, deal with the tax matters by yourself.
----------
The above content is only for charging reference on lilygo.cc website, the specific tax situation still depends on the local country's policy requirements, once the parcel is sent out, you need to keep an eye on its status, and to assist in handling it as needed when it arrives at the local customs, we will also follow up during the process, if you have any
With shell are soldered versions
T-Display-S3 is a development board whose main control chip is ESP32-S3. It is equipped with a 1.9-inch LCD color screen and two programmable buttons. Communication using the I8080 interface Retains the same layout design as T-Display. You can directly use ESP32S3 for USB communication or programming.
The shell is only available for the soldered and non-soldered versions , not for the touch version, and the S3 with shell are soldered versions.
Note:
- Please use USB2.0 (USB A-USB C) cable.
- Compatible With ST7789.
LILYGO® August 1, 2022
There are MIDI expansion boards for use with the T-Display S3
Connect it to headphones or a stereo and playback the simulated sound!
Compatible with all versions of T-Display S3.
[Please note that the package does not include the T-Display S3 device, only the MIDI Board, please select the right version of the T-Display S3 to use with the MIDI Board according to your needs].
Specifications
MCU | ESP32-S3R8 Dual-core LX7 microprocessor |
Wireless Connectivity | Wi-Fi 802.11, BLE 5 + BT mesh |
Programming Platform | Arduino-ide、 Micropython |
Flash | 16MB |
PSRAM | 8MB |
Bat voltage detection | IO04 |
Onboard functions | Boot + Reset + IO14 Button |
LCD | 1.9" diagonal, Full-color TFT Display |
Drive Chip | ST7789V |
Resolution | 170(H)RGB x320(V) 8-Bit Parallel Interface |
Working power supply | 3.3v |
Support |
STEMMA QT / Qwiic JST-SH 1.0mm 4-PIN |
Connector | JST-GH 1.25mm 2PIN |
Sample Code For Reference [Github]
If you need technical support please check below link to find more details.
T-Display-S3
T-Display-S3 Introduction
- The T-Display series has added a new member.
- It comes with the latest ESP32-S3 [Wi-Fi 802.11, BLE 5 + BT mesh].
- The screen has also been expanded from the original 1.14 inches to 1.9 inches, and an acrylic plate has been added to fix it.
- This will be the second LILYGO model Display with an acrylic plate fixed.
- The overall design continues the design of the T-Display series.
Pin Diagram
basic version
Touch Version
More details

What's In The Box
Not Solder Version

Solder Version


Only MIDI Board
[Please note that the package does not include the T-Display S3 device, only the MIDI Board, please select the appropriate version of the S3 to use with the MIDI Board according to your needs].

-
Who can use
It's easier to master these development boards with a basic programming knowledge [engineers/ students/ makers, etc..]
-
Accelerated processing
International orders please make sure your address is in English
For Hong Kong, Macau and Taiwan orders, please note your personal ID. -
Got a question
Click on the bubble in the bottom right corner where some frequently asked questions are answered, or just drop us a line.
I use the T-display-s3 for a variety of automation and sensing projects. The display is helpful for diagnostics and data display.
I use the Esphome development platform for all my esp32 projects.
The only issue I have with this device is the display driver for esphome requires the arduino framework ... this restricts what I can do with the device.
For example, secure MQTT requires the esp-idf framework.
The product is excellent the shipping good, and we will see how this customer service works. I am having a bear of a time to get this thing programmed. i have been all over the WWW and have seen different methods. Right now I have a bricked device so I ordered another which arrived, but still cannot find a way to program it if you can assist it would be great. Respectfully, Kerry
One of my five displays has a loose contact. I’m still waiting for an answer from the support.
Hi Sir,
Sorry for that, but don't worry, our support team will contact you again soon.
These are my go-to for any ESP32 project where I need the device to have a touch controlled user interface. Saves you from the grief of having so set up a bunch of external push buttons.
T-Display-S3