LILYGO® Shipping to worldwide
FabGL VGA32
FabGL VGA32
ESP32 PSRAM Module V1.4 Controller
4.4 / 5.0
(5) 5 total reviews
Couldn't load pickup availability
Share
About Shipping
About Shipping
Methods & Delivery Time
- Standard Express: 25-30 Days
- YunTu Express : 10-20 Days
(Company name can't be used consignee) - DHL: 10-17 Days
- FedEx: 10-17 Days
Please note that all delivery times are estimated for reference only.
Check More Info: Shipping Policy
About Tax
About Tax
For countries other than USA, we only charge [product cost + shipping cost], no tax.
Orders from US customers are adjusted according to different shipping channels:
1. For Standard Express Order: We charge【product cost + shipping cost + part of tax】this rate is only applicable to shipment from China warehouse.
(Since the tax is charged according to the declared amount, we have filtered the most suitable solution, and it is most likely that this shipping way does not need you to deal with the customs duty, but it is not absolute)
2. For DHL Order: We charge【product cost + shipping cost】no any tax, tax need you to pay attention to the local policy changes, when the parcel arrives at the US customs, deal with the tax matters by yourself.
----------
The above content is only for charging reference on lilygo.cc website, the specific tax situation still depends on the local country's policy requirements, once the parcel is sent out, you need to keep an eye on its status, and to assist in handling it as needed when it arrives at the local customs, we will also follow up during the process, if you have any
LILYGO® FabGL VGA32 VGA ESP32 PSRAM Module V1.4 Controller PS/2 Mouse Keyboard Graphics Library Game ANSI/VT Terminal Circuits
Specifications
Hardwear
Chipset | TTGO Micro32 |
FLASH | QSPI flash 4MB |
SRAM | 520 kB SRAM |
Button | Reset, IO36 |
Extended function | VGA, PS/2 , TF card |
USB to TTL | CH9102 |
Modular interface | UART、SPI、 SDIO、I2C_ LED PWM、TV PWM、I2S、 IRGPIO、 capacitor touch sensor、ADC、DACLNA pre -amplifier |
On-board clock | 40MHz crystal oscillator |
Working voltage | 2.7V-3.6V |
Working current | About 30mA |
Sleep current | 230uA |
Working temperature range | 40°C ~ +85C |
Size&Weight |
Without VGA : 60.99mm' 32.06mm* 16.79mm With VGA : 66.70mm*32.06mm * 16.79mm 21.25g |
Power Supply
Power Supply | Micro USB 5V/1A |
Charging current | 500mA |
Battery | 3.7V lithium battery |
Bluetooth
Protocol | Meet Bluetooth v4.2BR/EDR and BLE standard |
Radio frequency | with .-97dBm sensitivity NZIF receiver Class-1,Class 2&tClass-3 emitter AFH |
Audio frequency | CVSD&SBC audio frequency |
Software
Wi-Fi Mode | Station/SoftAP/SoftAP +Station/P2P |
Security mechanism | WPA/WPA2/WPA2- Enterprise/WPS |
Encryption Type | AES/RSA/ECC/SHA |
Firmware upgrade | UART download/OTA (Through network/host to download and write firmware) Software |
Software Development | Support cloud server development /SDK for user firmware development |
Networking protocol | IPv4、IPv6、 SSL. TCP/UDP/HTTP/FTP/MQTT |
User Configuration | AT + Instruction set, cloud server, android/iOSapp |
OS | FreeRTOS |
Add Function | Audio Frequency |
Technology Support [Github]
If you need technical support please check the link to find more details.
FabGL VGA32
1. Simple Pin Diagram
2. Appearance Details
1 X LILYGO® FabGL VGA32
-
Who can use
It's easier to master these development boards with a basic programming knowledge [engineers/ students/ makers, etc..]
-
Accelerated processing
International orders please make sure your address is in English
For Hong Kong, Macau and Taiwan orders, please note your personal ID. -
Got a question
Click on the bubble in the bottom right corner where some frequently asked questions are answered, or just drop us a line.
I emulate a Oric Atmos 48k ,my first personal computer, great memories revived
The board is good but the used esp32 chip is outdated. It should be the esp32-d0wd-v3 , instead the v1.
I have several of these modules ... some setup as ASCII terminals on my vintage computers, but also I have one setup as a VIC20 and another setup as an IBM XT PC. My only complaint is that I'd like modules like this that had USB ports for USB keyboards and USB mouses.
Something else that might be fun is the Altair 8800 with a Cromemco DAZZLER emulator on a module for play and testing new software ...
I did create a little 3D printable box for these that also houses a MAX232 to TTL adapter for a complete terminal or computer on PinShape.com.
LILYGO® TTGO VGA32 V1.4 Controller PS/2 case
https://pinshape.com/items/115750-3d-printed-lilygo-ttgo-vga32-v14-controller-ps2-case
The FabGL TTGO VGA32 board is really amazing. Extremely compact and integrated with PS2 connectors for mouse and keyboard, analog sound and VGA, this little board can even run a fully featured 8086 PC emulator up to Windows 3.0. And, of course Zx Spectrum (ESPectrum project), CPC Amstrad and much more. I highly recommend it!
this is amazing product