LILYGO® Shipping to worldwide
LoRa32 V1.0
LoRa32 V1.0
Wireless Module ESP32 LoRa 868/915Mhz OLED 0.96 Inch Display
5.0 / 5.0
(2) 2 total reviews
Couldn't load pickup availability
Share
About Shipping
About Shipping
Methods & Delivery Time
- Standard Express: 25-30 Days
- YunTu Express : 10-20 Days
(Company name can't be used consignee) - DHL: 10-17 Days
- FedEx: 10-17 Days
Please note that all delivery times are estimated for reference only.
Check More Info: Shipping Policy
About Tax
About Tax
For countries other than USA, we only charge [product cost + shipping cost], no tax.
Orders from US customers are adjusted according to different shipping channels:
1. For Standard Express Order: We charge【product cost + shipping cost + part of tax】this rate is only applicable to shipment from China warehouse.
(Since the tax is charged according to the declared amount, we have filtered the most suitable solution, and it is most likely that this shipping way does not need you to deal with the customs duty, but it is not absolute)
2. For DHL Order: We charge【product cost + shipping cost】no any tax, tax need you to pay attention to the local policy changes, when the parcel arrives at the US customs, deal with the tax matters by yourself.
----------
The above content is only for charging reference on lilygo.cc website, the specific tax situation still depends on the local country's policy requirements, once the parcel is sent out, you need to keep an eye on its status, and to assist in handling it as needed when it arrives at the local customs, we will also follow up during the process, if you have any
LoRa32 V1.0 Introduction
-
This product is an LoRa [SX1276 chip] Module based on ESP32 with 0.96 Inch OLED . As a LoRa remote modem, 868-915MHz frequency, high sensitivity and reliability, long transmission distance.
-
Supports for Arduino development environment perfectly, can be used for program checking and the development is easy and fast.
- It is recommended to purchase two piece for testing in order to transmit and receive data facilitatly.
Specification
MCU | ESP32 |
LoRa Chip | SX1276 |
Flash | 4M |
USB to TTL chip | CH910X |
Antenna |
Onboard WiFi 3D antenna IPEX holder LoRa antenna |
OLED |
0.96 Inch SSD1306 OLED 128*64 |
Operating voltage | 3.3V to 7V |
Operating temperature range | -40 ° C to + 90 ° C |
Data rates | 150 Mbps @ 11n HT40, 72 Mbps @ 11n HT20, 54 Mbps @ 11g, 11 Mbps @ 11b |
Transmit power | 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n Receiver sensitivity up to -98 dBm |
Red light | power indicator |
Blue light | IO25 programmable control |
Support for Sniffer software protocol analysis, Station, SoftAP, and Wi-Fi Direct modes |
UDP sustained throughput of 135 Mbps |
Technology Support [Github]
If you need technical support please check the link to find more details.
-
The 868/915MHz antenna needs to be in connection with the IPEX interface
-
Lithium battery charge and discharge circuit, when the battery is full, the blue LED will stop working.
-
When using, pay attention to “+”and "-" of the battery.
-
With IO port touch screen touch signal input, you need to add the 100nF pull-down capacitor to this pin!
-
Note: This product does not include the battery.
1. Size
2. Pin Diagram
LoRa32 V1.0 868/915Mhz Module
-
1 X LoRa32 V1.0 868/915Mhz Module
-
1 X Power cable (Jst 2pin 1.25mm)
-
1 X LoRa 868/915Mhz Antenna
-
2 X Pin
Waterproof Box [Color depends on your choice]









-
Who can use
It's easier to master these development boards with a basic programming knowledge [engineers/ students/ makers, etc..]
-
Accelerated processing
International orders please make sure your address is in English
For Hong Kong, Macau and Taiwan orders, please note your personal ID. -
Got a question
Click on the bubble in the bottom right corner where some frequently asked questions are answered, or just drop us a line.
These are great little devices! I've been using them for several years for communicating with my remote sensor network.
LoRa32 V1.0